Reading List and Speak Screen

For some time now I’ve been a big proponent of the default iOS apps. By and large these apps are fairly basic, at least in comparison to specialist third party offerings (think vs Spark Mail for example). Shortcomings like this, however, are easily overlooked because of the unparalleled integration many of these apps and services enjoy in comparison to their third party cousins.

I still use, and, for example, though I do still greatly enjoy third party apps to cover holes where integration with the OS isn’t as important. One such area is, or at least was a Read Later service. I’ve used Instapaper a lot in the past, but recently Pocket releases a killer new feature. This feature allows you to setup Pocket to read the articles you save there aloud to you. At first glance, this seemed like a feature I could really get behind. I’m a big podcast listener so I already enjoy a lot of audio content, so this felt like it would fit right into my way of consuming content. For all intents and purposes it does a good job. I’m not, however, using it anymore.

In keeping with my aim of staying first party when I’m able to, I did find it difficult to move away from Reading List which is, again, just so nicely integrated into the system.

The 233 words above, essentially, a largely redundant preamble just to, essentially say:

Hey, did you know you can replicate the Pocket ‘read aloud’ functionality within Reading List?

Allow me to, finally, cut to the chase. This isn’t a feature so much as it’s a simple utilisation of a fairly hidden away part of iOS. This utilises an Accessibility setting called ‘Speak Screen’. You can replicate Pockets Read Aloud service with Reading List by following these simple steps:

  1. Firstly you’ll need to activate the ‘Speak Screen’ function by navigating to General > Accessibility > Speech and toggle on ‘Speak Screen’

  2. Once activated, open up your Reading List and pick an article to open up.

  3. Once this is done, press the button on the top right of the screen to turn on Reader Mode, which strips out most of the formatting and leaves you with a basic fact article.
  4. Now, all you need to do is swipe down from the top of your device screen with two fingers to activate the iPhones own Read Aloud service. Upon doing so you will see a great little floating control panel that allows you to change the pace of the speech and pause it etc.


The nice thing about this UI item is that it collapses when not in use and floats on top of the screen, ready for you to tap when needed. The UI element allows you to pause, resume and change the speed of the narration. The audio playback also remains active across the device, in that you can close Safari and open another app whilst the narration continues in the background.

Don’t get me wrong, the feature on Pocket has obviously been designed with this specific use case in mind, so the voice itself it arguably better there but, for me at least, this is a far more flexible solution. You can utilise this on the fly as well, so you don’t need to send an article to Reading List, of course, prior to firing off the Speak Screen feature.

If you enjoy reading various articles, particularly long form, but often find yourself without time to actually read it, this is a really great option for when you’d usually tackle your podcast queue.

🔗 Christopher Tells You EVERYTHING You Need To Know About Working Off An iPad

I don’t often share link posts here at The Dent, but a video came out today that I just had to share with you all.

YouTuber, Podcaster and all round awesome guy Christopher Lawley dropped a video he’s been working on for some time, that aims to tell you EVERYTHING you need to know about working off an iPad. While this may sound like a bold claim, Christopher does indeed do a fantastic job of detailing some of the common, yet powerful use cases of an iPad, but he also unearths some real gems.

I consider myself a bit of an iPad Power user but there were things here that I didn’t know were possible, such as dragging an address bar to the side in Safari to open a split view (two Safari pages open on screen at once, not across two or more tabs). Whatever level of iPad user you consider yourself, I can almost guarantee there will be something in this video for you.

The thing that impressed me most of all about Christopher’s video, beyond the excellent production value, is that he was able to explain some, at times, complex operations in a very concise and easy to understand way. The beauty of the iPad, whether you’re using a ‘Pro’ device or not, is that you can use it for such a wide range of tasks. You can keep it very basic, if that fits your needs, or pull off some impressive productivity tricks. I don’t like the patronising term some bloggers and podcasters use to describe normal / non-techy users, but I do believe you could show Christopher’s video to the full spectrum of iPad users and all of them would both fully understand, and appreciate the excellent tips, advice and guidance. I would highly recommend you share this with anyone that uses an iPad from day to day, whatever their use case or level of skill.

You can find the video on Christopher’s YouTube channel or via the embed below:


Review – Memento

Over my many years of using iOS, I’ve worked my way through pretty much every To Do app on the market. So far, I think the only one I haven’t tried is Omnifocus because no one needs that much planning in their life. Please don’t email me …

When I try a new app or service, it usually lasts a few weeks, at most, before I start looking elsewhere. Throughout this time, however, one service has always been there, just hanging out in the background, ready to welcome me back with open arms. That service being Apple Reminders. Reminders is, of course, a default app on iOS, but it’s also an underlying framework that third party developers can also hook into and, essentially, create new front-end UIs for. For the last few months I’ve been using the fantastic GoodTask 3. GoodTask 3 sits on top of the Reminders framework and adds a whole slew of power user features. One of the things I’ve been loving about GoodTask 3 is the fact you can make your setup within the app as complicated, or as basic, as you need.

While the Reminders app itself has been quite stagnant for some time now, the third party app ecosystem that utilises the framework has been thriving. One such app, Reminder, was recently re-launched and re-branded to Memento, as part of their 3.0 update, so I thought I’d give it a try.

The app utilises a fairly unique UI for an iOS task manager app, but it will be very familiar to users of the iOS Home app. The Home apps interface has been critised by some over the years and, while I do like the look of it, it doesn’t deal with scale all that well. I currently have about 20 HomeKit accessories hooked up to the Home app, across Lights, Camera’s and Apple TVs etc. and it can get quite difficult to find what you’re looking for. This design within a To Do app, however, is pretty intriguing.


When you fire up the app for the first time you’re presented with a Permissions screen so the app can have access to the Reminders data / framework, notifications, location (both when in use and always), contacts and Siri. These are all standard things for an app of this kind to request access to, but this section is worth calling out here because it doesn’t just contain the toggle to approve or deny the request, but each section includes a short, yet detailed, description about why the app is asking for this access. This is definitely a practice I wish more apps would embrace.


Once you’ve approved, or denied, whatever areas you’re happy to, you’re presented with a clean UI with four tabs along the bottom. The first, Lists, looks very similar to the stock Reminders app in that it, as you’d imagine given the name, it displays the various Lists you have setup in Reminders. From here, you can choose your list and dive right in to see the reminder items contained within in. The main purpose of this view, however, is to create new lists, via the small + at the top of the page.

Next up, there’s a For You tab. This one provides the more traditional view of your reminder items, grouped up by day. This is the area that, to me, most closely mirrors the Home app interface, with each item occupying a small square under each day heading. You can see the task itself along with a tick box to complete the task, the date and time it’s due and also a colour-coded dot for the list it’s contained within. It’s all very simple, yet very intuitive and almost zen-like. This view is purely for viewing and completing tasks. You can’t actually create any here.


We then move onto the Reminders tab. This one is a bit of a combination of the first two tabs. You see a view of your various due tasks, with and without due dates, but they are now grouped under headings for each of your lists. This is the most information dense and functional screen within the app, and one I usually spend most of my time in. You can view, edit, complete and most importantly create new reminder items here. The plus symbol, used to create new tasks, is colour coded to the list colour, which is a small but aesthetically pleasing touch.

The final section will take you to the Settings section. This contains exactly what you’d expect, but there are a few areas worth calling out here. Firstly, the app has a robust Dark Mode, which you can activate here, along with the corresponding dark custom icon. You can not only configure the Dark Mode for the app, but you can also opt to turn on a similar effect for notifications and iMessage, which is a nice touch. Another important section here is the Time Presets section, which lets you define, you’ve guessed it, time presets! Here, you can set preset due times and give them names such as ‘This Evening’ for tasks you want to set to X time in the evening, or Next Week etc. This adds a lot of function and power to what is, generally speaking, a fairly light and simplistic experience. The final important area of the Settings tab is the Action area which lets you choose which actions you’d like to enable for each task. Some of the includes actions are ‘Complete’ to mark the task as done, and ‘Move to Tonight’ or ‘Snooze for X minutes’ etc.


The time presets, along with the Actions, give Memento just enough power user features for me, personally, whilst still maintaining a nice, simple and almost relaxing to do app experience. This is a fine line to tread and one that GoodTask 3 can often cross, leaning more on the complex side, for many first time users. For me, I’m still in the experimental phase with Memento and I’m currently unsure if this will end up being my replacement for GoodTask which is, to be honest, not an app I’ve been actively trying to replace. I’ve been very happy with GoodTask, but I’m enjoying the breath of fresh air Memento brings. Once again, the joy of using the Reminders framework is that I have the luxury of switching up my app, every day if I wished, without losing any of my tasks or setup which really takes the headache out of an addiction for trying new apps.

While I am, generally speaking, very impressed with this lightweight app, there is just one area I would like to see improvements on. The app does feature 3D Touch functionality, but the widget that appears when you do this, and which you see when you swipe across from the homescreen, is a little strange. When the widget is active, but minmised, you get a basic view that gives you a total count of location based tasks, overdue tasks and upcoming tasks. This isn’t a hugely helpful view. If you hit ‘show more’ you do, however, see the more familiar Home app style view of up to 9 upcoming tasks which you can mark off directly from within the app. This widget would be far more helpful if you could also add tasks here as well.

Seeing as the app relies on the Reminders framework, Siri integration is great within the app. You can use the standard Siri phrasing to add new reminders which will instantly show within the app, which is an underrated but great aspect of using Reminders as your back-end. Memento allows you to tie the app into Shortcuts as well. It’s nice to see apps continue to take advantage of this aspect of iOS 12.

If the Reminders functionality is enough for your To Do needs, but you’re a bit tired of the dated and bland look of the Reminders app proper, I would definitely recommend giving Memento a try. I’m certainly enjoying using it and will continue to experiment with it over the coming weeks and months.

🎙 22: Does Apple Have a Hive Mind?

In this weeks podcast I had to vent a little of my aggravation about the recent news about the FaceTime bug on iOS and why I think those reporting on this need to put things into perspective a little.

Some of the more click-bait heavy publications had a field day with the news, as you’d expect, but even some of the (usually) more level headed podcasts I enjoy have taken some very odd stances on this particular ‘issue’.

You can find links to the show below:

button-itunes button-overcast button-pocket-casts button-rss

You can also find a direct link on the podcast page.

📱 Review – iPhone Smart Battery Case

I tried to resist. I really did. A few days ago, however, I caved and picked up the iPhone XS Max Smart Battery case and I wanted to share a few thoughts. For those interested, I chose the black one, because I’m not an animal.

If you want the TL;DR for this review, let me just say that the case is no longer on my iPhone. If, however, you want a little more information, read on!

First things first, as you have probably worked out yourself from pictures, the Smart Battery case is pretty darn ugly. Unlike many people, I don’t actually mind the hump design where the battery itself is housed. I can see what they were going with there, but there’s more to the case that makes it a little ugly than that. I really love the sleek design of the current generation iPhones, with its bezel-less screen and thin, yet sturdy frame. This case, in one fell swoop, takes all of this pleasant aesthetic away.

Image courtesy of

The case is, understandably, thick at the back. This is, of course, to be expected. The frame on the other hand, around the band of the phone, adds some considerable bezel-like areas to the screen as is raised a lot more than the Apple Leather cases that I would usually use. There is also a lip at the bottom of the case, absent from the standard cases. This is due to, I imagine, the charging port and to enhance the grip of a heavy case. This bottom lip adds an issue you’ll often see in third party cases, in that it restricts the swipe up from the bottom motion that’s now requires to navigate the X range of devices. This is not ideal.

I mentioned earlier that I usually use an Apple Leather case for my phone. I’ve been doing this for years and I’ve really got used to the feel of it. I’ve always avoided the silicone ones, because I had assumed they’d be almost sticky and hard to get out of your pocket. The Smart Battery case utilises this same material and it’s actually the opposite to what I expected. It feels almost difficult to keep from slipping from your hand. This is, I would assume, due to the disable extra weight of the device thanks to its little battery backpack it’s carrying around. Don’t even get me started on the lint and fluff the case picks up. A couple of days into ownership and it looks a bit of a state already!

So, aesthetically, it’s no Mona Lisa. That being said, however, this devices gives you one of the few examples of where Apple has opted for Function over Form and it certainly is functional. On my completely unscientific test, the battery case added over 14 hours of standby time. I took the device and phone off charge at about 11pm, so bear in mind a chunk of that time included the phone resting completely idol. I don’t, however, get all that much sleep so this only would have accounted for about 4 hours.

It really was pretty incredible getting to about 3pm I’m the afternoon and still having a phone at 100% charge. The hardware also integrates with the iPhone seamlessly and displays the charging level of both the phone and the battery case when you connect to a charger, and in the battery widget, which is a lovely touch. The battery icon is permanently green, because it’s essentially being charged by the battery case. This is such a tiny point, but I found it a little distracting seeing the charging icon on the battery all day.

In terms of delivering what you want, a large boost to battery life, you can’t fault this case. The looks are not important, in the grand scheme of things, because I believe the point is to just use the case as and when you need a boost, rather than it being your main case. This being said, however, the way you have to fold the top section down a bit to yank the phone in and out doesn’t strike me as being very good for the silicone and even after pulling it out just once it feels a little worn.

All in all, I’d say I’d you really need an extra boost of life in your phone, you’d get no better quality and integration than Apple’s own case, though I wouldn’t recommend using it every day. Unless you like your phone feeling like a brick phone from the 80s that is. Each to their own, however. Given the price, I can’t justify the case sitting in my drawer for the majority of the year so it will be going back to Apple, but I will consider picking one up again should the need for longer battery life become more frequent for me.